Should you wish to make a new setting or lose your original one in any circumstances, please follow the procedures below. This service allows you to access in Hong Kong or overseas. When you access the services from overseas, roaming charges will be incurred. (I) Setup for local and overseas WAP Services
Source : one2free.hkcsl.com
Download Manual Book
Sunday, July 12, 2009
LG KE770 WAP ,MMS and IMAP E-Mail Service Setup Guide
DB-800 Daughterboard for MOTM-800 User Guide
The DB-800 is a daughterboard for the MOTM-800 EG. The DB-800 adds a comparator to the GATE input and a clipper to prevent the EG output from rising above +5 volts. The MOTM-800 requires a relatively fast rising signal at the GATE input to generate an envelope. Slow rising signals, like the SINE output from an LFO, will not normally trigger the MOTM-800. The comparator squares up any signal at the GATE input so that any voltage rising above +1.4 volts will trigger the EG. Two optional LED drivers are also provided, one for the GATE input and another for the EG output.
A comparator with hysteresis is built around U1. R1 and R2 set the upper trip point at approximately +1.4 volts. When the signal at the GATE input rises above the upper trip point, the output from U1 rises very quickly from 0 to +15 volts. The output from U1 stays at +15 volts until the signal at the GATE input goes below the lower trip point (approximately +1.2) volts. U1 then drops very quickly from +15 volts to 0 volts and stays there until the signal at the GATE input rises above the upper trip point again. This comparator circuit is placed between the GATE jack on the MOTM-800 panel and the GATE input pads on the MOTM-800 motherboard to generate a fast rising GATE from any input signal. U2b is a simple LED driver that turns on the GATE LED whenever the output from U1 goes high.
A comparator with hysteresis is built around U1. R1 and R2 set the upper trip point at approximately +1.4 volts. When the signal at the GATE input rises above the upper trip point, the output from U1 rises very quickly from 0 to +15 volts. The output from U1 stays at +15 volts until the signal at the GATE input goes below the lower trip point (approximately +1.2) volts. U1 then drops very quickly from +15 volts to 0 volts and stays there until the signal at the GATE input rises above the upper trip point again. This comparator circuit is placed between the GATE jack on the MOTM-800 panel and the GATE input pads on the MOTM-800 motherboard to generate a fast rising GATE from any input signal. U2b is a simple LED driver that turns on the GATE LED whenever the output from U1 goes high.
Source : www.tellun.com
Download Manual Book
Sony Ericsson P1i Review
Smartphone that joins office and multimedia functions - Sony Ericsson P1i continues the P series which started with the P800 model 5 years ago, in 2002. That’s a very long time and I personally would’ve expected to see more P models available on the market - but maybe less but better is more appropriate for SE’s marketing strategy. It seems that P1i suddenly became the chain link between the P series and M series, in terms of design, as well as performance.
Sony Ericsson’s M600 model is the closest device to the newly arrived P1i, thus it has the same concept design and comes with little improvements. There’s no doubt about it, P1i targets businessmen that are looking for good looking phones, but also need a reliable device that will help with their work. Sony Ericsson’s P1i smartphone has been announced in May 2007 and made available on the market in July 2007, for a suggested price of 650 USD.
SOurce : news.softpedia.com
Download Manual Book
Power of one Sony Ericsson P1i pdf
Touch the task manager icon in the top left-hand corner and this will tell you what programmes are running, but the P1i could seemingly handle over 10 without losing its thread. We were informed by Sony Ericsson at the P1i launch that a QWERTY keyboard is the preferred text input method for Europeans, while the Japanese favour touch-screen methods. Either way, the P1i covers all bases with the dual-function QWERTY, a virtual on-screen keyboard and, if you have the patience and skill to learn, handwriting recognition.
The dualfunction QWERTY keyboard assigns two letters to one key, relying on a rocker switch to differentiate. The P1i’s design works better than the Sony Ericsson M600i and, while you will be slower to begin with as it takes a good few days to pick up speed, persist and it soon becomes second nature.
Business brain
Just like its predecessor, the Sony Ericsson P1i has all the PIM, organisation and email trimmings for the business bod.
Source : mobilereviews.o2.co.uk
Download Manual Book
D-Client User’s Guide
D-Client is multipurpose online debranding, flashing and unlocking tool developed by proffesionals in SEMC service software market. With D-Client you don’t need any dongle anymore. All required is only one USB cable which you can buy at your nearest phone store + internet, and you can do unlock, change language at your phone, change customizations or repairing of new Sony Ericsson phones.
D-Client User’s Guide – First Start
1. Run D-Client.exe
2. D-Client application window shows up with News window above it. You may read the News and then close the window by clicking the Close button. If you don’t want to see this news again, please check the Don’t show this news next time checkbox.
3. To view all the Phone information, see chapter Phone Informa- tion.
Note:You don’t need the user account to view this info.
4. To check the prices of features, see chapter Checking the Prices If you want to flash or unlock your phone, see Settings chapter and then Flashing or Unlocking chapter
Note: You need the user account to flash, unlock or check the prices
Note: Any occured errors are stored in log file located in D-Client/Log folder.
Source : www.unlock4gsm.com
Download Manual Book
